Gasoline & Propane Sensor Only
This sensor is a replacement for Fireboy-Xintex P systems.
Installation:
- The sensor should be located by the propane-powered appliance, near the floor
- Avoid areas where damage may take place due to cleaning, mopping, kicking, or other physical damage
- Harsh chemicals should not be used to clean sensors
- Use the appropriate 8 mounting hardware to mount the Propane Fume Sensor in the desired location
- The rubber gasket should be installed between the sensor and the mounting surface
- Connect to the extension cable using the attached quick-disconnect connectors (Sold Separately)
![Samlex 10A Solar Charge Contoller - 12/24V [MSK-10A]](https://www.camperbeddingstore.com/wp-content/uploads/2026/11/samlex-10a-solar-charge-contoller-12-24v-msk-10a.webp)
![Garmin Adapter Plate f/GPSMAP 12x2 to 12x3 Series [010-12993-02]](https://www.camperbeddingstore.com/wp-content/uploads/2026/11/garmin-adapter-plate-f-gpsmap-12x2-12x3-series-010-12993-02.webp)
![Garmin Trim Piece Snap Cover f/GPSMAP 9x3 Series [010-12990-01]](https://www.camperbeddingstore.com/wp-content/uploads/2026/11/garmin-trim-piece-snap-cover-f-gpsmap-9x3-series-010-12990-01.webp)
